Oce VarioStream 7000 SINGLE Operating Manual - 6.15 General Cleaning
6.15 General cleaning
224
A29246-X20-X-4-7680 / fa605.fm
6.15 General cleaning
Caution
There can be a high build-up of static charge when vacuuming the toner spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber
nozzle and filter set for fine dust. For larger quantities of toner spill (e. g. full bottle),
the industrial vacuum cleaner must be explosion-proof.
Proceed as follows:
1.
Vacuum clean the floor around the printing system.
Caution
Fluid can get inside the printing system.
This could cause irreparable damage to the electrical and mechanical components.
Do not place cleaning fluids on top of or in the immediate vicinity of the printing
system and ensure that no fluids enter the printing system.
2.
Cleaning the surface of the housing:
• Add some mild household detergent to water and dip a soft cloth into the solution.
• Wring the cloth out well. Wipe down the surfaces of the housing with the cloth.