Oce VarioStream 7000 SINGLE Operating Manual - page 327
7.3.10 Replacing the waste collector
A29246-X20-X-4-7680 / fa703.fm
327
Caution
The components in the fuser station reach a surface temperature of approximately
230
o
C in operation.
If you touch them, you may burn yourself.
Do not touch any parts behind the safety covers identified with the icon
.
4.
Press in pressure pin and swivel out
the waste collector.
5.
Open the packaging of the new waste collector, taking care not to damage it.
6.
Remove new waste collector from the packaging and place on surface.
Caution
The components in the fuser station reach a surface temperature of approximately
230
o
C in operation.
If you touch them, you may burn yourself.
Put on heat protection gloves to continue working.
7.
Put on heat protection gloves.
Caution
Spilled oil can cause danger of slipping.
Wipe away any spilled oil with a paper towel.
Proceed as follows:
2 of 3