Oce VarioStream 7000 SINGLE Operating Manual - page 48
3.2.3 Toner bottle identification
48
A29246-X20-X-4-7680 / fa301.fm
3.2.3 Toner bottle identification
Toner bottle identification ensures that the toner bottle and toner box are assigned correctly
and unambiguously to the developer station. A plausibility check also prevents incorrect
settings on the developer station.
For this purpose, each toner bottle is equipped with a transponder for toner identification.
Transponder data is read by a reader and this information is analyzed by the printing
system.
1 Toner bottle
2 Transponder
3 Reader
4 Toner bottle holder
When a toner bottle with the correct toner type is identified, toner is sucked from the toner
bottle into the developer station toner boxes.
To prevent soiling of the developer stations and damage to the printing system, the printing
process is paused at print start, if:
• a toner bottle with an incorrect toner type is identified, or
• the toner bottle cannot be identified at all (because either no toner bottle is inserted or the
transponder on the toner bottle is faulty or not missing, or the reader is faulty).
Important
In both cases, a query is displayed on the operator panel asking whether printing
should continue regardless. If this query is confirmed, toner continues to be sucked
from the toner bottle into the developer station toner box. Soiling of the developer
stations and damage to the printing system cannot be ruled out however.
1
2
3
4