Oce VarioStream 7000 SINGLE Operating Manual - page 350
8.4.2 Poor printing, cause and correction
350
A29246-X20-X-4-7680 / fa805.fm
Discharge strip
-
-
-
Soiled plastic strips,
clean
Cleaning brush
-
-
-
Cleaning brush
soiled or faulty,
replace cleaning
brush.
Photoconductor
drum
Photoconductor
drum soiled, replace
Soiled, damaged (a
few spots are ok),
possibly replace
-
Damaged, possibly
replace.
Developer station
Developer out,
soiled: replace.
-
-
-
Paper transport
Creases or bumps in
the paper. Set,
correct, other paper.
-
Paper sticks in the
carton or to
deviations. Open up
carton, correct error.
-
Fuser station
-
(Possible offset if
there is not enough
oil, check oil level)
Printing not fused
(possible operator
error), call service.
Optimize: Fuser
temperature, fuser
oil quantity, brake
force of the paper
brake.
(Possible offset
effect if there is not
enough oil, check oil
level) Optimize:
Fuser temperature,
fuser oil quantity.
Possibly clean fuser
roller.
Printhead
Only for
printingsystems with
LPH2: Clean LED
print head: In the
activate cleaning>. - - - Error source Type of error and correction Bright spots / streaks in printed image Dark spots Smudged print image Memory effects ghost image