Oce VarioStream 7000 SINGLE Operating Manual - page 206
of
384
6.7 Cleaning the developer station
206
A29246-X20-X-4-7680 / fa603.fm
12.
Remove vacuum hose from the rubber
clip and insert into the toner box until it
reaches the stop point.
13. Close the center and left door at the back of the printing system.
14. Close the door in front of the photoconductor drum.
15. Close the right door at the front of the printing system.
16. Click the following button to switch the printing system to the "Ready" status:
Proceed as follows:
4 of 4