Oce VarioStream 7000 SINGLE Operating Manual - page 149
of
384
5.9.2.1 Removing the developer station
A29246-X20-X-4-7680 / fa509.fm
149
2.
Push the replacement cart forwards
into the holes to the stop point.
3.
Check whether the replacement cart has engaged in the printing system:
Hold the replacement cart by the handle and pull backwards. The replacement cart
must not come away from the printing system now.
Caution
Possibility of damage to the replacement cart.
Make absolutely sure that the replacement cart has engaged in the printing system.
Otherwise, the replacement cart could be damaged at the horizontal guide rails when
the developer station is pulled from the printing system in the next step.
4.
Push the lever on both roller brakes
downwards.
Proceed as follows:
2 of 4