Oce VarioStream 7000 SINGLE Operating Manual - 6.8 Cleaning Sensors
of
384
6.8 Cleaning sensors
A29246-X20-X-4-7680 / fa603.fm
207
6.8 Cleaning sensors
An error message in the operator panel notifies you that it is time for cleaning.
6.8.1 Cleaning the toner mark sensor
Proceed as follows:
1.
If the printing system has not yet stopped, click the following button:
2.
Remove the photoconductor drum(see section 7.3.1 Replacing the photoconductor
drum, page 257).
3.
Clean the toner mark sensor with a soft
cloth.
4.
Reinsert the photoconductor drum(see section 7.3.1 Replacing the photoconductor
drum, page 257).
5.
Click the following button to switch the printing system to the "Ready" status: