Oce VarioStream 7000 SINGLE Operating Manual - page 128
5.6.3 Input at the operator panel
128
A29246-X20-X-4-7680 / fa505.fm
The values for the following settings must be determined by test runs with the paper being
used.
• Changing the fusing temperature:
2.
On the operator panel select:
• Menu 3. • If using light or normal paper: select the "Calibrator" checkbox with a mouse click. • If using light or normal paper: deactivate the "Calibrator" checkbox with a mouse click. 4. Click on the following button: Important The printing system needs a certain amount of time to reach the new temperature. Proceed as follows: 1. If the printing system has not yet stopped, click the following button: 2. On the operator panel select: • Menu 3. Select the desired temperature under "Fusing temperature". 4. Click on the following button: Proceed as follows: 2 of 2