Oce VarioStream 7000 SINGLE Operating Manual - page 195
of
384
6.5 Cleaning the fuser station
A29246-X20-X-4-7680 / fa603.fm
195
16.
Turn fuser roller by hand and check
visually whether visible damage, such
as scratches, loosened coating or
blistering is present on the surface.
Replace the fuser roller if damaged
(see section 7.3.8 Replacing the fuser
roller, page 312).
17. Only if a soft fuser roller is installed:
Also check whether the fuser roller is soiled with toner.
If so, clean the fuser roller (see section (see section 6.6 Cleaning the soft fuser roller,
page 199)).
18.
Press the lock and swivel off the lower
cover.
19.
Push the lock below the fuser station to
the left and swivel off the roller saddle.
Proceed as follows:
5 of 8