Oce VarioStream 7000 SINGLE Operating Manual - page 127
of
384
5.6.3 Input at the operator panel
A29246-X20-X-4-7680 / fa505.fm
127
• Entering the paper width:
• Setting the calibration gap:
4.
Click on the following button:
Proceed as follows:
1.
If the printing system has not yet stopped, click the following button:
2.
On the operator panel select:
• Menu
3.
Under "Paper width":
• Set the paper width with the slide control.
or
• Enter the paper width in the text field.
4.
Click on the following button:
Proceed as follows:
1.
If the printing system has not yet stopped, click the following button:
1 of 2
Proceed as follows:
2 of 2