Oce VarioStream 7000 SINGLE Operating Manual - page 231
7.2.1 Replacing the toner bottle
A29246-X20-X-4-7680 / fa701.fm
231
6.
Slowly swivel the toner bottle back into
position by the handle.
7.
Close the center door at the back of the printing system.
8.
On the operator panel, enter whether a new toner bottle has been fitted:
•
The message on the operator panel is deleted automatically, the replacement of
the toner bottle is recorded in the
consumable counter is reset.
•
The consumable counter is not reset.
9.
Click the following button on the operator panel to complete toner bottle replacement:
All printing system assemblies are checked (duration approx. 2-3 minutes) before the
printing system is switched to the "Ready" status.
In both cases, the message on the operator panel is automatically deleted, the
replacement of the toner bottle is recorded in the
the consumable counter is reset.
Proceed as follows:
3 of 3