ABB SA/S 12.16.6.1 Product Manual - Knx Commissioning
Manual is about: Switch Actuators
of
172
ABB i-bus
®
KNX Commissioning
SA/S | 2CDC 505 056 D0207 125
3.2.5.1.4 Parameter window
A: Current Detection
In this parameter window, all settings for the function Current Detection are
undertaken.
This parameter is visible if in parameter window
, page 117, the
parameter Enable function “current detection” has been enabled.
Note
The function current detection and the respective parameter window are
only visible with the Switch Actuators with current detection (SA/S
x.16.6.1). They are both equally available in the Switch Actuator and
Heating Actuator
modes.
As the function for the modes does not differ, refer to the descriptions of
the parameter setting options and adjustable communication objects from
parameter window
, page 94.