ABB SA/S 12.16.6.1 Product Manual - Knx Commissioning
ABB i-bus
®
KNX Commissioning
SA/S | 2CDC 505 056 D0207 67
Enable functions "priority and safety
operation"
Options: no
yes
no: The parameter window A: Safety for output A is not enabled.
yes: The parameter window A: Safety for output A is enabled. In this
parameter window, the safety priorities 1, 2, 3 and forced operation are
parameterized.
Enable function "threshold"
Options: no
yes
no: The parameter window A: Threshold for output A is not enabled.
yes: The parameter window A: Threshold for output A is enabled.
Enable function "current detection"
Options: no
yes
no: The parameter window A: Current detection for output A is not
enabled.
yes: The parameter window A: Current detection for output A as well as
the communication object Contact monitoring are enabled.
Note
These parameters and their functions are only visible for Switch Actuators
with current detection. The actuators with integrated current detection are
recognisable by a number 6 on the third position of the type designation,
e.g. SA/S 2.16.6.1.