ABB SA/S 12.16.6.1 Product Manual - Planning and Application
Manual is about: Switch Actuators
of
172
ABB i-bus
®
KNX
Planning and application
144 2CDC 505 056 D0207 | SA/S
4.2.2.3
Flashing
The output can flash when the output is switched on and off periodically.
The switch on time (T
ON
) and switch off time (T
OFF
) during flashing can be
programmed.
Note
The contact life of the contacts should be considered and can be found in
the technical data. A limitation of the number of switching operations with
the parameter Number of impulses may be useful.
Furthermore, a delay in the switching sequence is possible caused by the
limited availability of switching energy with very frequent switching.
The possible number of switching operations should be considered.
Output
Communication
object Switch
ON
OFF
T
ON
1
0
T
OFF