ABB SA/S 12.16.6.1 Product Manual - Planning and Application
ABB i-bus
®
KNX
Planning and application
SA/S | 2CDC 505 056 D0207 147
4.2.4
Function Preset
A parameterizable switching state can be retrieved with the help of presets.
Light scenes can therefore be implemented for example with a 1 bit
communication object.
Retrieve preset
Switch states (“preset values”) can be retrieved via the communication
objects Recall preset 1/2. A maximum of two preset values are available for
each output:
Action
Telegram
Recall preset 1
Communication object Recall Preset 1/2 = 0
Recall preset 2
Communication object Recall Preset 1/2 = 1
Store preset
The current switching state is stored as a new preset value via the
communication object Set preset 1/2. The user can, for example, adapt a
lighting scene in this way. The presets are stored via the following values:
Action
Telegram
Save preset 1
Communication object Set preset 1/2 = 0
Save preset 2
Communication object Set preset 1/2 = 1
Button push
call preset
OFF
Actuator 1
ON
Actuator 2
ON
Actuator 3
Button push
save preset
ON
Actuator 1
OFF
Actuator 2
ON
Actuator 3