ABB SA/S 12.16.6.1 Product Manual - Knx Commissioning
ABB i-bus
®
KNX Commissioning
48 2CDC 505 056 D0207 | SA/S
The following conversions are possible from the point of view of the target
devices.
Device type target
device
Application name
target device
Convertible to
Device type
source device
Application name
source device
SA/S x.16.5S (V2.0)
SA/S x.20.1S (V2.0)
Switch xf 16CS/2.0
Switch xf 20S/2.0
SA/S 2.16.6.1 (V1.2)
or
SA/S 2.16.5.1 (V1.2)
Switch 2f 16CS/3.2
or
Switch 2f 16C/3.2
SA/S x.16.6.1 (V1.0)
SA/S x.16.6.1 (V1.1 or 1.2)
SA/S x.16.5.1 (V1.1 or 1.2)
Switch xf 16CS/3.0
Switch xf 16CS/3.1 or 3.2
Switch xf 16C/3.1 or 3.2
SA/S x.16.5S (V2.0)
SA/S x.20.1S (V2.0)
Switch xf 16CS/2.0
Switch xf 20S/2.0
SA/S 4.16.6.1 (V1.2)
or
SA/S 4.16.5.1 (V1.2)
Switch 4f 16CS/3.2
or
Switch 4f 16C/3.2
SA/S x.16.6.1 (V1.0)
SA/S x.16.6.1 (V1.1 or 1.2)
SA/S x.16.5.1 (V1.1 or 1.2)
Switch xf 16CS/3.0
Switch xf 16CS/3.1 or 3.2
Switch xf 16C/3.1 or 3.2
SA/S x.16.5S
SA/S x.20.1S
Switch xf 16CS/2.0
Switch xf 20S/2.0
SA/S 8.16.6.1 (V1.2)
or
SA/S 8.16.5.1 (V1.2)
Switch 8f 16CS/3.2
or
Switch 8f 16C/3.2
SA/S x.16.6.1 (V1.0)
SA/S x.16.6.1 (V1.1 or 1.2)
SA/S x.16.5.1 (V1.1 or 1.2)
Switch xf 16CS/3.0
Switch xf 16CS/3.1 or 3.2
Switch xf 16C/3.1 or 3.2
SA/S x.16.5S
SA/S x.20.1S
Switch xf 16CS/2.0
Switch xf 20S/2.0
SA/S 8.16.6.1 (V1.2)
or
SA/S 8.16.5.1 (V1.2)
Switch 12f 16CS/3.2
or
Switch 12f 16C/3.2
SA/S x.16.6.1 (V1.0)
SA/S x.16.6.1 (V1.1 or 1.2)
SA/S x.16.5.1 (V1.1 or 1.2)
Switch xf 16CS/3.0
Switch xf 16CS/3.1 or 3.2
Switch xf 16C/3.1 or 3.2
non-convertible
SA/S 12.16.5
SA/S 12.20.5
Switch 12f 16C/2.0
Switch 12f 20A/2.0
The version number in brackets refers to the program version of the application.
Important
Normally, the version numbers of our product names correspond with the
version numbers of the application programs. There are some exceptrions
in this respect with Switch Actuators, e.g. with the SA/S 4.16.6.1:
Product name:
Switch Actuator, 4-fold, 16A, MDRC (V1.0)
Application program:
Switch 4f 16CS/3.0
Important
The Switch Actuator types SA/S x.16.6.1 differentiate from the
predecessor types SA/S x.16.5S by new hardware and software.
While there have been few changes to the functions of the software, the
hardware has been redesigned for load currents up to 20 A. Furthermore,
the current detection has been optimised and its accuracy has been
enhanced by a factor of four.
In order to minimise the programming effort, in the SA/S x.16.6.1 and
SA/S x.16.5.1 it is possible to copy or exchange the parameterization of
an output.