ABB SA/S 12.16.6.1 Product Manual - Planning and Application
Manual is about: Switch Actuators
of
172
ABB i-bus
®
KNX
Planning and application
SA/S | 2CDC 505 056 D0207 153
Threshold values are not hysteresis values
When the value exceeds or falls below any threshold value, the output is
switched.
Note
If the communication object Threshold value receives a value, which does
not exceed or fall below any of the threshold values when compared to the
old value, no switching operations are triggered.
Communication object Threshold
Upper threshold
Lower threshold
ON
OFF
Switches output
ON
ON
OFF
OFF
ON
OFF
{
{
{
OFF