ABB SA/S 12.16.6.1 Product Manual - Planning and Application
ABB i-bus
®
KNX
Planning and application
SA/S | 2CDC 505 056 D0207 143
4.2.2.2
Switching ON and OFF
delay
The switching ON and OFF delay delays switch on or switch off of the
output.
The delay time T
D1
or T
D0
starts after a switch telegram, and after it has
timed out, the output executes the switch telegram.
If a new ON telegram with the value 1 is received during the switch on delay,
the time of the switch on delay starts again. The same applies to switch off
for the switch off delay. If a new OFF telegram with the value 0 is received
during the switch off delay, the time of the switch off delay starts again.
Note
If the device receives an OFF telegram during the switch on delay T
D1
, an
ON telegram is disregarded.
Output
Communication
object Switch
ON
OFF
T
D0
T
D1
1
Example 1:
T
D1
1
0
Output
Communication
object Switch
ON
OFF
T
D0
T
D1
1
Example 2:
T
D1
0
1
0
0
T
D0