ABB SA/S 12.16.6.1 Product Manual - Knx Device
ABB i-bus
®
KNX Device
technology
30 2CDC 505 056 D0207 | SA/S
Device type
Application program
Maximum number of
communication objects
Maximum number of
group addresses
Maximum number of
associations
SA/S 2.16.6.1
Switch 2f 16CS/…*
40 254 254
SA/S 4.16.6.1
Switch 4f 16CS/…*
76
254
254
SA/S 8.16.6.1
Switch 8f 16CS/…*
148 254 254
SA/S 12.16.6.1
Switch 12f 16CS/…*
220
254
254
* … = current version number of the application program
Note
The ETS and the current version of the device application program are
required for programming.
The current version of the application program is available for download
on the Internet at www.abb.com/knx. After import it is available in the ETS
under ABB/Output/Binary output xf 16CS/…* (x = 2, 4, 8 or 12).
The device does not support the closing function of a KNX device in the
ETS. If you inhibit access to all devices of the project with a BCU code, it
has no effect on this device. Data can still be read and programmed.
Important
The Switch Actuator types SA/S x.16.6.1 differentiates from the
predecessor types SA/S x.16.5S by new hardware and software.
While there have been few changes to the functions of the software, the
hardware has been redesigned for load currents up to 20 A. Furthermore,
the current detection has been optimised and its accuracy has been
enhanced by a factor of four.
Existing projects can be converted to ensure operation with the new
hardware / software.
For further information see:
Conversion of previous application program versions
For faster and simpler commissioning, it is also possible to copy the
parameter settings of the outputs to others or to exchange them with
another output.
For further information see: