ABB SA/S 12.16.6.1 Product Manual - Knx Commissioning
ABB i-bus
®
KNX Commissioning
72 2CDC 505 056 D0207 | SA/S
Staircase lighting can be switched
Options:
ON with 1 and OFF with 0
ON with 1 no action with 0
ON with 0 or 1, switch OFF not possible
This parameter defines the telegram value used for switching the
staircase lighting on and off prematurely.
ON with 0 or 1, switch OFF not possible: The function Staircase lighting
is switched on independently of the value of the incoming telegram.
Premature switch off is not possible.
Note
After enabling the Function time via the communication object
Disable time function
, the contact position of the enabled output
remains unchanged. Function Time is only triggered after the next
switching telegram. This means however, should the option ON with
"1" no action "0"
be parameterized, the output is switched on
simultaneously with enable. Switch off via the bus is thus not
possible. Only after, e.g. the function Staircase lighting is started,
does the output switch off, after the staircase lighting time has
elapsed.
Warning before end of staircase lighting
Options: no
via
object
via quick switching OFF/ON
via object and switching ON/OFF
Before the staircase lighting time times-out, the user can be informed
of the imminent switch off of the lighting by a warning. If the warning
time is not equal to 0, the staircase lighting time is extended by the
warning time. The warning time is not modified by the pumping action.
no: No warning is given, the staircase light switches off immediately after
the staircase lighting time elapses. If the staircase lighting is ended
prematurely, e.g. by a switching telegram, no warning is given.