ABB SA/S 12.16.6.1 Product Manual - Knx Commissioning
ABB i-bus
®
KNX Commissioning
SA/S | 2CDC 505 056 D0207 53
Target channels
With the selection of the target channels, you define which channel/channels
are to assume the parameter settings of the source channel.
For the function Exchange, only one target output can be selected at a
time.
For the function Copy, different target channels can be selected
simultaneously. For this purpose, press the Ctrl key and mark the
required channels, e.g. channel B and H, with the mouse cursor.
With this button, you select all available target channels, e.g.
A…H.
Reset the selection of the target channel with this button.
Copy
The following options can be selected before copying the parameter
settings:
Leave the group addresses unchanged (if possible) in the target channel
Copy group addresses
Delete group addresses in the target channel
With this button, copy the settings of the source channel into
the target channel or channels.
Exchange
The following options can be selected before exchanging the parameter
settings:
Retain group addresses
Exchange of group addresses
Deletion of group addresses
With this button, exchange the settings of the source channel
with the target channel.
Confirm your selection with this button, and the window
closes.
Using this button, the window closes without accepting the
changes.