ABB SA/S 12.16.6.1 Product Manual - Knx Commissioning
ABB i-bus
®
KNX Commissioning
44 2CDC 505 056 D0207 | SA/S
3.1
Overview
The following table provides an overview of the functions with the Switch
Actuators and their application programs:
SA/S 4.6.1
SA/S 8.6.1
SA/S 12.6.1
SA/S 2.10.1
SA/S 4.10.1
SA/S 8.10.1
SA/S 12.10.1
SA/S 2.16.1
SA/S 4.16.1
SA/S 8.16.1
SA/S 12.16.1
SA/S 2.16.5.1
SA/S 4.16.5.1
SA/S 8.16.5.1
SA/S 12.16.5.1
SA/S 2.16.6.1
SA/S 4.16.6.1
SA/S 8.16.6.1
SA/S 12.16.6.1
Installation
type
MDRC MDRC MDRC MDRC MDRC
Number of outputs
4/8/12 2/4/8/12 2/4/8/12 2/4/8/12 2/4/8/12
Module width (space units)
2/4/6
2/4/8/12 2/4/8/12 2/4/8/12 2/4/8/12
Manual operation
–
Contact position display
–
I
n
rated current (A)
6 A
10 AX
16 A
16/20 A
16/20 A
Current
detection
– – – –
Switch function
– ON/OFF delay
– Staircase lighting
– Warning before end of staircase lighting
– Staircase lighting time set via object
– Flashing
– Switch response can be set (N.O./N.C.)
– Threshold values
Current detection
– – – –
– Threshold value monitoring
–
–
–
–
– Measured value detection
–
–
–
–
Function Scene
Function Logic
– Logical AND
– Logical OR
– Logical XOR
– Gate function
Priority object/forced operation
Heating/blower control
– Switch ON/OFF (2 point control)
– Cyclic fault monitoring
– Automatic purge
Fan Coil control
1)
Special functions
– Default position on bus voltage failure/ bus
voltage recovery
– Status messages
1)
See special ABB i-bus
®
KNX devices of the HVAC area, e.g. Fan/Fan Coil Actuator LFA/S or Fan Coil Actuator FCA/S.
= possible functions