ABB SA/S 12.16.6.1 Product Manual - Planning and Application
ABB i-bus
®
KNX
Planning and application
SA/S | 2CDC 505 056 D0207 151
Example
An 8 bit scene (no. 8) comprises of some lamps, which are connected for
switching to Switch Actuators and dimming e.g. to Switch/Dim Actuator.
Furthermore, two blinds are integrated via a Blind Actuator. The Scene 8
can be retrieved via a single KNX telegram. The prerequisite for this is
that all channels have programmed with scene 8. After a telegram has
been received the blinds moves to the corresponding position; the lighting
assumes the predefined brightness value and the switching status defined
by Scene 8.
Note
The scene numbering 1 to 64 is retrieved via the KNX with a telegram
number 0 to 63. For the corresponding scene coding see
Move to position
(height and slat
angle) 80 %
Blind actuator
Switch/dim actuator
Blind position
20 %
KNX scene recall
with 8 bit telegram
Telegram
Switch actuator
Switch actuator
Brightness values
20 %
0 %
90 %