ABB SA/S 12.16.6.1 Product Manual - Knx General
ABB i-bus
®
KNX General
6 2CDC 505 056 D0207 | SA/S
Furthermore, the Switch Actuators with current detection, SA/S x.16.6.1,
feature per output the function load current detection with programmable
reaction to two current threshold values. The current value can be sent via
the bus. Individual outputs can be copied or exchanged to reduce the
programming effort to the minimum in the Switch Actuators SA/S x.16.6.1
and SA/S x.16.5.1.
Switch Actuators SA/S x.16.6.1 feature a current accuracy that is factor 4
higher than the predecessor SA/S x.16.5.S. The SA/S x.16.6.1 and SA/S
x.16.5.1 are suitable for rated currents up to 20 A and feature C-Load
switching capacity.
In the following table, you will find an overview of the ABB i-bus
®
Switch
Actuators and their type designations:
–
SA/S 2.10.1
SA/S 2.16.1
SA/S 2.16.5.1
SA/S 2.16.6.1
SA/S 4.6.1
SA/S 4.10.1
SA/S 4.16.1
SA/S 4.16.5.1
SA/S 4.16.6.1
SA/S 8.6.1
SA/S 8.10.1
SA/S 8.16.1
SA/S 8.16.5.1
SA/S 8.16.6.1
SA/S 12.6.1
SA/S 12.10.1
SA/S 12.16.1
SA/S 12.16.5.1
SA/S 12.16.6.1
Note
The codes represent the following:
SA/S x.y.z.w
x = number of outputs (2, 4, 8 or 12)
y = rated current in Amperes (6, 10, 16)
z = load type specification:
1 = type for resistive loads (AC1 switching capacity)
5 = type with higher switch capacity C-Load (200
μF)
6 = type with higher switch capacity C-Load and current detection
w = version number