Jeep 1996 Grand Cherokee Service Manual - page 1203
is tight around front clutch retainer. This prevents
front/rear clutches from coming out with pump and
possibly damaging clutch or pump components.
(21) Remove oil pump bolts.
(22) Thread bolts of Slide Hammer Tools C-3752
into threaded holes in pump body flange (Fig. 135).
(23) Bump slide hammer weights outward to
remove pump and reaction shaft support assembly
from case (Fig. 135).
(24) Loosen front band adjusting screw until band
is completely loose.
(25) Squeeze front band together and remove band
strut (Fig. 136).
Fig. 134 Removing/Installing Front Band Lever Shaft
Access Plug
Fig. 135 Removing Oil Pump And Reaction Shaft
Support Assembly
Fig. 136 Removing/Installing Front Band Strut
Fig. 132 Valve Body Removal
Fig. 133 Accumulator Piston And Springs
21 - 64
TRANSMISSION AND TRANSFER CASE
ZJ
DISASSEMBLY AND ASSEMBLY (Continued)