Jeep 1996 Grand Cherokee Service Manual - page 1205
(31) Remove intermediate shaft thrust washer
from front end of shaft or from rear clutch hub (Fig.
141).
(32) Remove output shaft thrust plate from inter-
mediate shaft hub (Fig. 142).
(33) Slide front band off driving shell (Fig. 143)
and remove band from case.
(34) Remove planetary geartrain as assembly (Fig.
144). Support geartrain with both hands during
removal. Do not allow machined surfaces on interme-
diate shaft or overdrive piston retainer to become
nicked or scratched.
(35) Loosen rear band adjusting screw 4-5 turns.
Fig. 143 Front Band Removal/Installation
Fig. 144 Removing Planetary Geartrain And
Intermediate Shaft Assembly
Fig. 141 Removing Intermediate Shaft Thrust
Washer
Fig. 142 Removing Intermediate Shaft Thrust Plate
21 - 66
TRANSMISSION AND TRANSFER CASE
ZJ
DISASSEMBLY AND ASSEMBLY (Continued)