Jeep 1996 Grand Cherokee Service Manual - page 1268
One complete turn of the adjusting screw changes
line pressure approximately 1-2/3 psi (9 kPa).
Turning
the
adjusting
screw
counterclockwise
increases pressure while turning the screw clockwise
decreases pressure.
THROTTLE PRESSURE ADJUSTMENT
Insert Gauge Tool C-3763 between the throttle
lever cam and the kickdown valve stem (Fig. 367).
Push the gauge tool inward to compress the kick-
down valve against the spring and bottom the throt-
tle valve.
Maintain pressure against kickdown valve spring.
Turn throttle lever stop screw until the screw head
touches throttle lever tang and the throttle lever cam
touches gauge tool.
NOTE: The kickdown valve spring must be fully
compressed and the kickdown valve completely
bottomed to obtain correct adjustment.
SCHEMATICS AND DIAGRAMS
HYDRAULIC SCHEMATICS
Fig. 366 Line Pressure Adjustment
Fig. 367 Throttle Pressure Adjustment
ZJ
TRANSMISSION AND TRANSFER CASE
21 - 129
ADJUSTMENTS (Continued)