Jeep 1996 Grand Cherokee Service Manual - page 72
(5) Install case in the housing. Tap the differential
case to ensure the bearings are fully seated (Fig. 17).
Remove the spreader.
(6) Install the bearing caps at their original loca-
tions (Fig. 18). Tighten the bearing cap bolts to 61
N·m (45 ft. lbs.) torque.
INNER AXLE SHAFT OIL SEAL REPLACEMENT
SELECT–TRAC
(1) Remove the inner axle shaft seals with a pry
bay.
(2) Install oil seals with Discs 6764 and Turn-
buckle D–112A (Fig. 19). Tighten tool until disc bot-
toms in housing.
PINION GEAR
REMOVAL/DISASSEMBLY
(1) Remove the pinion yoke nut and washer. Use
Remover C–452 and Wrench C–3281 to remove the
pinion yoke (Fig. 20).
Fig. 17 Differential Installation
Fig. 18 Differential Bearing Cap Reference Letters
Fig. 19 Axle Seal Installation
Fig. 20 Pinion Yoke Removal
ZJ
DIFFERENTIAL AND DRIVELINE
3 - 27
REMOVAL AND INSTALLATION (Continued)