Jeep 1996 Grand Cherokee Service Manual - page 1538
Manual is about: 1996 ZJ Jeep Grand Cherokee
of
1551
(6) Install first mainshaft bearing spacer on main-
shaft (Fig. 66).
(7) Install bearing rollers on mainshaft (Fig. 66).
Coat bearing rollers with generous quantity of
petroleum jelly to hold them in place.
(8) Install remaining bearing spacer on mainshaft
(Fig. 66). Do not displace any bearings while install-
ing spacer.
Fig. 63 Sector O-Ring And Bushing Installation
Fig. 64 Assembling Low Range Fork And Hub
Fig. 65 Positioning Low Range Fork
Fig. 66 Installing Mainshaft Bearing Rollers and
Spacers
ZJ
TRANSMISSION AND TRANSFER CASE
21 - 19
DISASSEMBLY AND ASSEMBLY (Continued)