Jeep 1996 Grand Cherokee Service Manual - page 139
(6) Install and lubricate Step Plate C–4487–1 (Fig.
45).
(7) Assemble Threaded Adapter C–4487–3 into top
side gear. Thread forcing Screw C–4487–2 into
adapter until it becomes centered in adapter plate.
(8) Position
a
small
screw
driver
in
slot
of
Threaded Adapter C–4487–3 (Fig. 46) to prevent
adapter from turning.
(9) Tighten forcing screw tool 122 N·m (90 ft. lbs.)
(maximum) to compress Belleville springs in clutch
packs (Fig. 47).
(10) Using a 0.020 in. feeler gauge and mallet,
remove thrust washers from behind the pinion gears
(Fig. 48).
Fig. 45 Step Plate Tool Installation
Fig. 46 Threaded Adapter Installation
Fig. 47 Tighten Belleville Spring Compressor Tool
Fig. 48 Remove Pinion Thrust Washer
3 - 94
DIFFERENTIAL AND DRIVELINE
ZJ
DISASSEMBLY AND ASSEMBLY (Continued)