Jeep 1996 Grand Cherokee Service Manual - page 34
Manual is about: 1996 ZJ Jeep Grand Cherokee
of
1551
NOTE: Tighten the clamp bolt furthest from the
wheel first. Make sure the toe setting does not
change during clamp tightening.
(6) Verify alignment specifications, then turn the
engine off.
SPECIFICATIONS
ALIGNMENT
FRONT WHEELS
ADJUSTMENT
PREFERRED
RANGE
CASTER
7°
6.5° to 7.5°
CAMBER
(not adjustable)
NA
-1.13° to +
0.13°
TOE-IN
(each wheel)
0.12°
0° to + 0.22°
Toe Differential Left to Right .05°
REAR AXLE
ADJUSTMENT
SPECIFICATION
THRUST ANGLE
(not adjustable)
± .25°
TOTAL TOE-IN
(not adjustable)
0.00 to + 0.5°
ZJ
SUSPENSION
2 - 5
SERVICE PROCEDURES (Continued)
1996 Grand Cherokee
Publication No. 81-370-6147
TSB 26-04-96
April, 1996