Jeep 1996 Grand Cherokee Service Manual - page 134
Manual is about: 1996 ZJ Jeep Grand Cherokee
of
1551
(7) Remove the rear bearing cup from housing
(Fig. 27). Use Remover C-4307 and Handle C–4171.
(8) Remove the collapsible preload spacer (Fig. 28).
(9) Remove the inner bearing from the pinion with
Puller C–293PA and Adapter C–293–39 (Fig. 29).
Place adapter rings so they do not damage
the bearing cage.
(10) Remove the depth shims from the pinion gear
shaft. Record the thickness of the depth shims.
PINION GEAR INSTALLATION
(1) Install
the
pinion
rear
bearing
cup
with
Installer C—4308 and Driver Handle C–4171 (Fig.
30). Ensure cup is correctly seated.
Fig. 27 Rear Bearing Cup Removal
Fig. 28 Collapsible Spacer
Fig. 29 Inner Bearing Removal
Fig. 30 Pinion Rear Bearing Cup Installation
ZJ
DIFFERENTIAL AND DRIVELINE
3 - 89
REMOVAL AND INSTALLATION (Continued)