Quanta Computer QuantaMesh User Manual - page 187
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
187
5.2.13 Port Mirror
5.2.13.1 show monitor session
This command displays the Port monitoring information for the specified session.
Syntax
show monitor session
Default Setting
None
Command Mode
Privileged Exec
Display Message
Session ID: indicates the session ID.
Admin Mode: indicates whether the Port Monitoring feature is enabled or disabled. The possible
values are enabled and disabled.
Dest. Port: is the slot/port that is configured as the probe port. If this value has not been configured,
'Not Configured' will be displayed.
Source Port: is the slot/port that is configured as the monitored port. If this value has not been
configured, 'Not Configured' will be displayed.
Type: Direction in which source port configured for port mirroring.Types are tx for transmitted
packets and rx for receiving packets.