Quanta Computer QuantaMesh User Manual - page 543
Manual is about: Layer 2/3/4 Managed Switch
of
1020
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
543
5.20.2.12 match ethertype
This command adds to the specified class definition a match condition based on the value of the
ethertype. The
ipv4, ipv6, ipx, mplsmcast, mplsucast, netbios, novell, pppoe, rarp or as a custom ethertype value
in the range of 0x0600-0xFFFF.
This command is not available on the Broadcom 5630x platform.
Syntax
match ethertype {
<0x0600-0xFFFF> - Specifies ethertype value.
Default Setting
None
Command Mode
Class-Map Config
i