Quanta Computer QuantaMesh User Manual - page 952
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | IPv6 Commands
952
8.4.2.9 ipv6 ospf retransmit-interval
This command sets the OSPF retransmit Interval for the specified interface. The retransmit interval is
specified in seconds. The value for
advertisement retransmissions for adjacencies belonging to this router interface. This value is also used
when retransmitting database description and link-state request packets. Valid values range from 0 to
3600 (1 hour).
Syntax
ipv6 ospf retransmit-interval
no ipv6 ospf retransmit-interval
Default Setting
5
Command Mode
Interface Config
8.4.2.10 ipv6 ospf transmit-delay
This command sets the OSPF Transit Delay for the specified interface. The transmit delay is specified in
seconds. In addition, it sets the estimated number of seconds it takes to transmit a link state update
packet over this interface. Valid values for
Syntax
ipv6 ospf transmit-delay
no ipv6 ospf transmit-delay
Default Setting
1
Command Mode
Interface Config