Quanta Computer QuantaMesh User Manual - page 414
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
414
5.11.2.7 sntp server
This command configures an SNTP server (with a maximum of three) where the server address can be
an ip address or a domain name and the address type either IPv4, IPv6, dnsv6 or dns. The optional
priority can be a value of 1-3, the version is a value of 1-4, and the port id is a value of 1-65535.
Syntax
sntp server
no sntp server remove
server.
<1-3> - The range is 1 to 3.
no - This command deletes an server from the configured SNTP servers.
Default Setting
None
Command Mode
Global Config