Quanta Computer QuantaMesh User Manual - page 353
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
353
5.9.1.21 show port-security interface
This command shows the port-security settings for a particular interface or all interfaces.
Syntax
show port-security {
Default Setting
None
Command Mode
Privileged Exec
Display Message
Intf Interface Number.
Admin Mode Port Locking mode for the Interface.
Dynamic Limit Maximum dynamically allocated MAC Addresses.
Static Limit Maximum statically allocated MAC Addresses.
Violation Trap Mode Whether violation traps are enabled.
Sticky Mode Whether sticky mode is enabled.
Violation Shutdown Whether violation shutdowns are enabled.