Quanta Computer QuantaMesh User Manual - page 328
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
328
5.8.2.2 Unlock a locked user account
The user can go to the CLI Global Configuration Mode to unlock a locked user account, use the
username
Syntax
username
Default Setting
None
Command Mode
Global Config
5.8.2.3 username snmpv3 authentication
This command specifies the authentication protocol to be used for the specified login user. The valid
authentication protocols are none, md5 or sha. If md5 or sha are specified, the user login password will
be used as the snmpv3 authentication password. The
specified authentication protocol will be used.
Syntax
username snmpv3 authentication
no username snmpv3 authentication
md5 - md5 authentication method.
sha - sha authentication method.
none - no use authentication method.
no - This command sets the authentication protocol to be used for the specified login user to none.
The
Default Setting
No authentication
Command Mode
Global Config