Quanta Computer QuantaMesh User Manual - page 944
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | IPv6 Commands
944
8.4.1.11 show ipv6 ospf range
This command displays information about the area ranges for the specified
identifies the OSPF area whose ranges are being displayed.
Syntax
show ipv6 ospf range
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Area ID: The area id of the requested OSPF area.
IP Address: An IP Address which represents this area range.
Subnet Mask: A valid subnet mask for this area range.
Lsdb Type: The type of link advertisement associated with this area range.
Advertisement: The status of the advertisement. Advertisement has two possible settings: enabled
or disabled.