Quanta Computer QuantaMesh User Manual - page 269
Manual is about: Layer 2/3/4 Managed Switch
of
1020
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
269
5.3.14.7 serviceport ipv6 gateway
Use this command to configure IPv6 gateway (i.e. Default routers) information for the service port.
Syntax
serviceport ipv6 gateway
no serviceport ipv6 gateway
no - This command remove IPv6 gateways on the service port interface.
Only a single IPv6 gateway address can be configured for the service port. There may be a
combination of IPv6 prefixes and gateways that are explicitly configured and those that are
set through auto-address configuration with a connected IPv6 router on their service port
interface.
Default Setting
None
Command Mode
Global Config
i