Quanta Computer QuantaMesh User Manual - page 373
Manual is about: Layer 2/3/4 Managed Switch
of
1020
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
373
5.9.4.3 radius server attribute 4
This command to set the NAS-IP address for the radius server.
Syntax
radius server attribute 4 [
no radius server attribute 4
no – use this command to reset the NAS-IP address for the radius server.
Default Setting
None
Command Mode
Global Config
5.9.4.4 radius server attribute 95
This command to set the NAS-IPv6 address for the radius server.
Syntax
radius server attribute 95 [ipv6 address]
no radius server attribute 95
no – use this command to reset the NAS-IPv6 address for the radius server.
Default Setting
None
Command Mode
Global Config