Quanta Computer QuantaMesh User Manual - page 240
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
240
This command enables the sending of new root traps and topology change notification traps.
Syntax
snmp-server enable traps stpmode
no snmp-server enable traps stpmode
no - This command disables the sending of new root traps and topology change notification traps.
Default Setting
Enabled
Command Mode
Global Config
This command enables the transceiver trap.
Syntax
snmp-server enable traps transceiver
no snmp-server enable traps transceiver
no - This command disables the transceiver trap.
Default Setting
Disabled
Command Mode
Global Config
This command enables the violation trap.
Syntax
snmp-server enable traps violation
no snmp-server enable traps violation
no - This command disables the violation trap.
Default Setting