Quanta Computer QuantaMesh User Manual - page 305
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
305
5.5.2.2 logging console
This command enables logging to the console.
Syntax
logging console [
no logging console
[
through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4),
notice (5), informational (6), debug (7).
no - This command disables logging to the console.
Default Setting
None
Command Mode
Global Config
5.5.2.3 logging monitor
This command enables logging to the terminal monitor.
Syntax
logging monitor [
no logging monitor
[
through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4),
notice (5), informational (6), debug (7).
no - This command disables logging to the terminal monitor.
Default Setting
None
Command Mode
Globla Config