Quanta Computer QuantaMesh User Manual - page 726
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands
726
Syntax
bootpdhcprelay maxhopcount
no bootpdhcprelay maxhopcount
no - Set the maximum hop count to 4.
Default Setting
The default value is 4.
Command Mode
Global Config
6.4.2.4 bootpdhcprelay minwaittime
This command configures the minimum wait time in seconds for BootP/DHCP Relay on the system.
When the BOOTP relay agent receives a BOOTREQUEST message, it may use the
seconds-since-client-began-booting field of the request as a factor in deciding whether to relay the
request or not.
Syntax
bootpdhcprelay minwaittime
no bootpdhcprelay minwaittime
no - Set the minimum wait time to 0 seconds.
Default Setting
The default value is 0.
Command Mode
Global Config