Quanta Computer QuantaMesh User Manual - page 485
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
485
5.16.8.2 traceroute ipv6
This command is used to discover the routes that packets actually take when traveling to their
destination through the network on a hop-by-hop basis. The
be a valid IPv6 address|hostname.
Syntax
traceroute ipv6
[count
between the local and remote system. Range is 1 to 255.
value. Range is 1 to 10 probes.
Default Setting
None
Command Mode
Privileged Exec