Quanta Computer QuantaMesh User Manual - page 534
Manual is about: Layer 2/3/4 Managed Switch
of
1020
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
534
5.20.1 General Commands
The following characteristics are configurable for the platform as a whole.
5.20.1.1 diffserv
This command sets the DiffServ operational mode to active. While disabled, the DiffServ configuration is
retained and can be changed, but it is not activated. When enabled, Diffserv services are activated.
Syntax
diffserv
Command Mode
Global Config
5.20.1.2 no diffserv
This command sets the DiffServ operational mode to inactive. While disabled, the DiffServ configuration
is retained and can be changed, but it is not activated. When enabled, Diffserv services are activated.
Syntax
no diffserv
Command Mode
Global Config