Quanta Computer QuantaMesh User Manual - page 484
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
484
5.16.8 traceroute
5.16.8.1 traceroute
Use the traceroute command to discover the routes that packets actually take when traveling to their
destination through the network on a hop-by-hop basis. Traceroute continues to provide a synchronous
response when initiated from the CLI.
Syntax
traceroute
[interval
between the local and remote system. Range is 1 to 255.
value. Range is 1 to 10 probes.
Default Setting
None
Command Mode
Previledge Mode