Quanta Computer QuantaMesh User Manual - page 426
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
426
5.12.1.9 show lldp med interface
The user can go to the CLI Privilege Exec to d
display a summary of the current LLDP-MED
configuration for a specific interface, use the show lldp med interface [] Privilege
command.
Syntax
show lldp med interface [
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Specifies all the ports on which LLDP-MED can be configured.
Link: Specifies the link status of the ports whether it is Up/Down.
configMED: Specifies the LLDP-MED mode is enabled or disabled on this interface.
OperMED: Specifies the LLDP-MED TLVs are transmitted or not on this interface
ConfigNotify: Specifies the LLDP-MED topology notification mode of the interface.
TLVsTx: Specifies the LLDP-MED transmit TLV(s) that are included