Quanta Computer QuantaMesh User Manual - page 366
Manual is about: Layer 2/3/4 Managed Switch
of
1020
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
366
5.9.3.9 dot1x re-authentication
This command enables re-authentication of the supplicant for the specified port.
Syntax
dot1x re-authentication
no dot1x re-authentication
no - This command disables re-authentication of the supplicant for the specified port.
Default Setting
Disabled
Command Mode
Interface Config
5.9.3.10 dot1x supplicant max-start
This command configure the maximum number of Start EAPOL messages to be sent in the absence of
Authenticator.
Syntax
dot1x supplicant max-start <1-10>
no dot1x supplicant max-start
Default Setting
3
Command Mode
Interface Config