Quanta Computer QuantaMesh User Manual - page 652
Manual is about: Layer 2/3/4 Managed Switch
of
1020
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands
652
Syntax
permit ip host
no permit ip host
no – Use this command to delete a rule for a valid IP and MAC combination.
Default Setting
None
Command Mode
ARP Access-list Config
6.1.2.9 clear ip arp-cache
This command causes all ARP entries of type dynamic to be removed form the ARP cache. If the
[gateway] parameter is specified, the dynamic entries of type gateway are purged as well.
Syntax
clear ip arp-cache [gateway | interface {
Default Setting
None
Command Mode
Privileged Exec